The VMAC diesel driven air compressor is the best choice for customers who need the performance of a truck engine-driven air compressor, without running the truck. Engine idle reduction is important to decrease emissions, save fuel and maintenance costs, and extend truck and equipment life. Another way VMAC reduces engine idling is with the most intelligent control system available, automatically shutting the compressor engines off when air isn’t needed, and restarting the compressor engine when air is needed.
Diesel Driven Air Compressors—The most intelligent mobile air compressor available!
External Diesel Fuel Pump allows the VMAC diesel driven air compressor to be tied into the vehicles diesel fuel tank; mounts externally; activates automatically when the air compressor key switch is in RUN position and disables automatically when air compressor enters Standby Mode or key switch is turned OFF.
1,750 W, 12 V power inverter; required to power the VMAC diesel driven air compressor cold climate kit.
Remote control panel for the 1,750 W power inverter; shows status and has an on/off button.
Exhaust pipe with 90° elbow; directs the exhaust upwards to lower the noise level; includes rain flapper.
Air receiver tanks are used for lowering compressor duty cycle and removing water from compressed air. Recommended for proper operation of all VMAC Hydraulic air compressor functions, including Standby Mode; manufactured to FMVSS 121 Standard; includes fittings, 160psi pressure relief valve, and tank drain. Maximum pressure: Up to 150 psi
Air receiver tanks are used for lowering compressor duty cycle and removing water from compressed air. Recommended for optimum operation of VMAC Hydraulic Air Compressors, VMAC Diesel Driven Air Compressors, UNDERHOOD40, UNDERHOOD70 (including Green Series Air Compressors), DTM70/DTM70-H, and VMAC Multifunction Power Systems, which include standby mode; ASME certified.
Air receiver tanks are used for lowering compressor duty cycle and removing water from compressed air. Recommended for optimum operation of VMAC Diesel Air Compressors, Hydraulic Air Compressors, UNDERHOOD40, UNDERHOOD70 (including Green Series Air Compressors), DTM70/DTM70-H, and VMAC Multifunction Power Systems, which include standby mode; ASME certified; includes fittings.
Extends life of air tools; filter removes contaminants from the compressed air, adjustable regulator can reduce air pressure going to tools, and lubricator adds atomized tool oil to the air stream to lubricate air tools. Maximum flow: Up to 70 CFM / 150 psi Port size: 3/4" NPT inlet.
Improves performance and extends life of air tools; removes up to 80% of water from compressed air; includes automatic water drain. Maximum flow: 70 CFM / 175 psi Port size: 3/4" NPT inlet and outlet Electrical: 12 V Dimensions: 17.0” (l) x 8.0” (w) x 14.5” (h); 43.2 cm
7-gallon diesel fuel tank mounts directly to the VMAC diesel driven air compressor; includes mechanical fuel gauge and low-fuel shut-off sensor. Fuel Capacity: 7-Gallons Dimensions: 18.0” (l) x 4.75” (w) x 20.63” (h); 45.7 cm (l) x 12.1 cm (w) x 52.4 cm (h) Weight (dry): 25 lbs (11.3 kg)
Spring-loaded 1/2" x 50’ hose reel; steel construction; full flow shaft and swivel for maximum performance. Maximum pressure: 300 psi Dimensions: 19.0” (l) x 7.0” (w) x 20.25” (h); 48.3 cm (l) x 17.8 cm (w) x 51.4 cm (h) Weight: 51 lbs (23.1 kg)