Gas Driven Air Compressors

VMAC G30 gas engine driven air compressors are the best choice for customers who need the lightweight, compact performance of a rotary screw air compressor, at the lowest price possible.

Gas Driven Air Compressors—The most affordable gas driven rotary screw air compressor available!

Gas Driven Air Compressor Accessories

Cold Climate Kit

Cold climate heater package for operating the VMAC G30 Gas Driven Air Compressor in freezing climates; proven at temperatures of -30°C (-22°F); 120 V AC Heater; requires 600 W @ 5 Amps.

Remote Control Panel

Remote control panel with ten foot extension for key switch, hour meter, choke, and unloader.

Remote Engine Oil Drain

3 foot remote drain hose allows the engine oil to be easily drained.

6-Gallon Air Receiver Wing Tank

Air receiver tanks are used for lowering compressor duty cycle and removing water from compressed air. Recommended for proper operation of all VMAC Hydraulic air compressor functions, including Standby Mode; manufactured to FMVSS 121 Standard; includes fittings, 160psi pressure relief valve, and tank drain. Maximum pressure: Up to 150 psi.

10-Gallon Air Receiver Tank w/ Mounting Feet

Air receiver tanks are used for lowering compressor duty cycle and removing water from compressed air. Recommended for optimum operation of VMAC Hydraulic Air Compressors, VMAC Diesel Driven Air Compressors, UNDERHOOD40, UNDERHOOD70 (including Green Series Air Compressors), DTM70/DTM70-H, and VMAC Multifunction Power Systems, which include standby mode; ASME certified.

12-Gallon Low Profile Air Receiver Tank

Triple 4-gallon air receiver tanks with mounting frame; includes 200 psi pressure gauge, fittings, hose, ball valve and drain valves. Maximum pressure: Up to 150 psi Dimensions: 35.0” (l) x 20.5” (w) x 8.4” (h); 88.9 cm (l) x 52.0 cm (w) x 21.3 cm (h) Weight: 80 lbs

35-Gallon Air Receiver Wing Tank

Air receiver tanks are used for lowering compressor duty cycle and removing water from compressed air. Recommended for optimum operation of VMAC Diesel Air Compressors, Hydraulic Air Compressors, UNDERHOOD40, UNDERHOOD70 (including Green Series Air Compressors), DTM70/DTM70-H, and VMAC Multifunction Power Systems, which include standby mode; ASME certified; includes fittings.

Filter Regulator Lubricator (FRL) – 70 CFM

Extends life of air tools; filter removes contaminants from the compressed air, adjustable regulator can reduce air pressure going to tools, and lubricator adds atomized tool oil to the air stream to lubricate air tools. Maximum flow: Up to 70 CFM / 150 psi Port size: 3/4" NPT inlet.

600 W Power Inverter

600 W, 12 V power inverter; required to power the VMAC G30 gas driven air compressor cold climate kit.

1/2″ x 50’ Hose Reel

Spring-loaded 1/2" x 50’ hose reel; steel construction; full flow shaft and swivel for maximum performance. Maximum pressure: 300 psi Dimensions: 19.0” (l) x 7.0” (w) x 20.25” (h); 48.3 cm (l) x 17.8 cm (w) x 51.4 cm (h) Weight: 51 lbs (23.1 kg)